WIG-WAG Police Lights for your 1:18 Scale model Cars

This comes with 4 front white head light LED's

This Wig Wag has 5 settings that match the ones you see in a real Police Car:

Steady On - Slow Flash - Medium - Fast - Crazy Strobe.

The 4 White LED's are wired with 4 inches wires from the circuit board the rear red LEDs are 10" long from the board. The Circuit Board is about 1 inch long, less than 1 inch wide and 1/10th of an inch tall. A switch is wired 11 inches from the board. Press the switch once for steady on again for 2nd pattern, etc. 5th press turns it off, there is no auto-shutoff. The 2 power leads connect to any 9 volt DC battery source The battery leads are 11 inches long to reach to the trunk. Hook these leads to a fresh 9 volt battery and you are on your way! There are no additional electronics required. We even include a FREE battery strap!

on/off switches are optional per request.

email me
Add this page to your favorites.
1:18 Scale Wig-Wag Lights Item # 1906
Tell a friend about this page